Page 1 of 1

Spee-Dee Sport

Posted: Wed Jun 04, 2025 8:53 am
by KevinC
introducing the brand spanking new Spee-Dee Sport. Available NOW at WillyNillies.com!
Pics and details below.
Spee-deeSport1.png
Spee-deeSport2.png
SPEE-DEE Sport - great flying all around sport plane with a tremendous speed range! Nice an docile and almost trainer like on 2S 350, OR REALLY let her go with a 3S-300! It will fly very slowly and hang on the prop into a little bit of wind, then punch the throttle and go what seems like 100 mph!

The wing is SOLID balsa that requires some carving and sanding. It only takes about 5-10 minutes per wing panel to complete. The fuselage is typical built up box construction and the tail feathers are solid sheet. A very quick build that can be painted or covered - finish however you like!

We highly recommend our 1/4a TD .020 LITE power package and 5 gram servos.

Specifications:
Wingspan: 25"
AVG Chord: 4.25"
Area: 106.25 in/sq No Ailerons
Fuse Length: 17.5"
Weight ready to fly: 160 grams (3S - 300 MAH)
Wing loading: 7.7 oz/sq in
Wing Cube Loading: 9

Features:
Build as 3 or 4 channel -Ailerons, Elevator and Throttle (rudder optional)
Built in servo tray in fuselage
Easy access hatch for battery access
Laser cut self-jigging construction - The entire airframe can be built ready to cover in less than 1 hour!

Includes:
All balsa and wood that is required to build the complete airframe
Pushrods
Laser cut control horns

Recommended Equipment:
2 each 2.5-to-6-gram servos
Power: 1407-2800kv brushless motor
-or Cox .020 glow engine

For Brushless –
-Battery: 2s 350 mah lipo battery
or: 3s 350 mah lipo battery for CRAZY performance!
- ESC -minimum 12-amp ESC.
- Prop - Gemfan 5030, 6030 or equivalent

THIS IS A BETA KIT! Only Very Basic BUILD INSTRUCTIONS are included.

PLEASE CONTACT US WITH ALL QUESTIONS AND SUGGESTIONS!