P-Jay mod for rudder servo
Posted: Sat Aug 24, 2024 1:56 pm
I wanted a rudder for my P-Jay AND I wanted a hatch to access it if needed. Here's my mod, which also includes my magnetic latch for the canopy.
The aileron and elevator servos mount from below so my rudder servo mounts from above which will make pushrod routing easier. The ply blocks will be drilled and the hatch held on with a screw in each end since I shouldn't need to use often.
The aileron and elevator servos mount from below so my rudder servo mounts from above which will make pushrod routing easier. The ply blocks will be drilled and the hatch held on with a screw in each end since I shouldn't need to use often.